Getting To Know Your Tv; Typical Control Panel; Sleep Timer - Zenith Sentry 2 SR2500 Operating Manual & Warranty

Monaural direct-viewcolor tv
Table of Contents

Advertisement

GETTING
TO KNOW
YOUR TV
TYPICAL
CONTROL
PANEL
The control panel on your TV may differ from the one shown but the operation is the same.
ENTER
(ENT)
Press to see the Channel/Time
dis-
play, or to remove
any on-screen
display or menu.
• ADJUST
ADJUST
(ADJ) Left/Right
Press during on-screen
menu op-
eration to see information/status
display
for selected option.
Press
again to adjust the selected menu
option.
SELECT (SEL)
Press during on-screen menu
operations to select a menu
VOLUME (VOL) Up/Down
OFF-ON
Press to increase or decrease the
Press to turn TV
sound level,
power ON or OFF.
/
MENU
Press once to see a menu. Press
repeatedly
to sequence
through
the other available
menus.
CHANNEL (CH) Up/Down
Press to select channels higher or
lower than the current channel.
To add or delete channels stored
in the scanning sequence, see
CH. ADD/DEL option.
Remote Window
Point the remote
control towards this
window to operate
the TV.
SLEEP
TIMER
The SLEEP TIMER is a feature which allows you to program
the TV to automatically turn itself off after a period of time;
from 15 minutes up to 4 hours.
To Set SLEEP TIMER
1,
2.
Press TIMER to view the SLEEP TIMER display.
Press TIMER repeatedly
to choose the period of
time you want the TV to remain ON, before it turns
itself off.
SLEEP
TIMER
:30
Sleep Timer Set to Turn TV OFF in 30 Minutes.
3. Press ENTER to start the timer and remove the dis-
play from the TV screen.
One minute before the TV turns off, the GOOD NIGHT dis-
play appears on the screen.
SLEEP
TIMER
GOOD NIGHT
0:58
"Good Night" Display Appears 60 Seconds Before Shut-off.
At this time you have a choice of the following three actions:
1. Do nothing. The GOOD NIGHT display remains
on
the screen. The TV will turn off in one minute.
2. Remove the GOOD NIGHT display by pressing EN-
TER. The TV will still turn off in one minute.
3. Delay the turn-off
by resetting
the timer with a new
time period.
To Cancel the SLEEP TIMER
Cancel the SLEEP TIMER by returning to the SLEEP TIMER
display and setting it to OFF or by turning the TV OFF.
2912-0
2--
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sentry 2 sr2549Sentry 2 sr2501Sentry 2 sr2550

Table of Contents