The First Time You Operate Your Tv; Step 1. Connect The Power; Step 2. Select Your Language; Step 3. Use Auto Program - Zenith Sentry 2 Operating Manual & Warranty

THE FIRST TIME YOU OPERATE YOUR TV
STEP 1. CONNECT THE POWER
A.Plug your TV into an unswitched AC power source.
B.Turn the TV on by pressing OFF-ON.
I)o not plug TV into switched outlet on a
VCR or cable-TV decoder
STEP 2. SELECT YOUR LANGUAGE
Select the language for the on-screen menus. Your options
are English (ENGLISH), Spanish (ESPAiQOL) or French
(FRAN_AIS). The word LANGUAGE always appears in
English no matter which language is chosen.
1. Press MENU repeatedly on the remote control until
the SETUP MENU is shown.
2. Press SELECT (SEL) to highlight LANGUAGE then
use ADJUST (ADJ) to choose the desired language.
3. Press ENTER (ENT) to return to normal viewing.
SE]IJPMENU
AUTO PROGR _.M
CH. AOD/DEL
CH. LABELS,
TUNING BANE.
AUTO TUNINCi
CLOCK SET
CAPTIONS
-> LANGUAGE.
ENGLISH
Setup Menu _4th Language Highlighted
STEP 3. USE AUTO PROGRAM
When your TV is first powered up you will see the AUTO
PROGRAM reminder display. AUTO PROGRAM finds
all available channels and stores them in the memory, of the
TV. To activate AUTO PROGRAM, press ADJUST
(ADJ) Left/Right,
SETUP MENU
-_ AUTO PROG:I/IAt
CH. ADD,QEI.
CH. LABELS
TUNING BA_ID
AUTO TUNII_IG
CLOCK SET
CAPTIONS
LANGUAGE
START
Setup Menu with Auto Program Highlighted
DETERMINING TUNING BAND
1
Determining Tuning Band
TUNING
BAND
IS
CPI ri-i Is FOUND
Searching for Channels
f
K.rrO P_g3GP4_I K_S _
TUNING BANE)IS I"i '']
E_] CHANNELS FOUND
Search is Completed
CId 13
STEREO
Normal Operation
z732-o 2 -- 1