Download Print this page
JVC GR-SXM750 Instructions Manual
JVC GR-SXM750 Instructions Manual

JVC GR-SXM750 Instructions Manual

Compact vhs camcorder
Hide thumbs Also See for GR-SXM750:

Advertisement

Quick Links

GR.SXM750
For Customer
Use:
Enter below the Model No. and Serial No. which is
located on the bottom of the camcorder.
Retain this
information
for future reference.
Model No.
Serial
No.
SunerVHS
Super VHS ET
_
Printed in Malaysia
_
1102-AS-NF-PJ
COPYRIGHT@
2002 VICTOR COMPANY
OF JAPAN, LTD
Automatic
Demonstration
takes
place
when
"DEMO
MODE"
is set
to "ON"
{factory-preset).
• Available
when the Power Switch _]) is set to "Q"
or "[]"
while pressing
down the Lock Button _)
located
on the switch.
• Performing
any operation
during the demonstration
stops the demonstration
temporarily.
If no operation
is performed
for more than 1 minute after that, the demonstration
will resume.
• "DEMO
MODE"
remains "ON" even if the camcorder
power is turned off.
• To cancel Automatic
Demonstration,
set the Power Switch _ to "[]"
and press the MENU Wheel O in
while the demo is in progress.
This takes you directly to the demo
mode's Setting Menu (so you will not
have to go through the main Menu Screen).
Rotate the MENU Wheel O to select "OFF" and press it.
NOTES:
• When a tape whose
Erase Protection
tab is in the position that allows recording
is loaded in the
camcorder,
demonstration
is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes
of the Automatic
Demonstration
activated
on the LCD monitor or viewfinder.

Advertisement

loading

Summary of Contents for JVC GR-SXM750

  • Page 1 GR.SXM750 SunerVHS Super VHS ET For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of the camcorder. Retain this information for future reference. Model No. Printed in Malaysia 1102-AS-NF-PJ Serial COPYRIGHT@ 2002 VICTOR COMPANY OF JAPAN, LTD Automatic Demonstration...
  • Page 2: Ac Adapter

    =AC Adapter • Battery Pack AP-V13U or AP-Vll U BN-VllU • Shoulder Strap =Cassette Adapter C-P7U • Lens Cap • AA (R6) Battery (for Cassette Adapter) NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter.
  • Page 3 PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. where. • Use the JVC BN-V11 U/V12U/V20U/V400U The lightning flash with arrowhead symbol, within an battery packs and, to recharge them or to supply equilateral triangle, is intended to alert the user to the...
  • Page 4 Please call 1 -800-8-BATTERY for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. JVC's involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.
  • Page 5 AC Adapter ..............pg. 6 Picture Stabilizer ............pg. 18 Animation Recording ..........pg. 21 Playback ..............pg. 11 Auto Date Record ............ pg. 21 Programme AE with Special Effects ......pg. 23 Auto Focus ............... pg. 12 Provided Accessories ..........
  • Page 6 USING THE BATTERY PACK v-,,F Perform step 1) of "CHARGING THE BATTERY Hook on. PACK". Approximate recording time (unit: rain,) Battery pack Viewfinder on LCD monitor on BN-V11U Push in. (45) (40) BN-V12U (optional) (45) (40) BN-V20U (optional) (75) (70) BATTERY RELEASE Switch...
  • Page 7 Consult an • The following operation stops charging authorised JVC dealer for replacement, or set the discharging: date/time as necessary before you start shooting. • Set the Power Switch _])to "PLAY", "El" or "1_ ".
  • Page 8 "f'riped Meuntlng Grip Adjustment Align the screw and camera direction stud on the 1) Separate the Velcro strip. tripod with the tripod mounting socket _. Then 2) Pass your right hand through the loop and grasp the grip. tighten the screw. 3) Adjust so that your thumb and fingers can easily operate...
  • Page 9 During shooting Keep the lens cap attached the camcorder. Cassette holder • Viewfinder Turn the gear to take up slack. Speaker LCD monitor protection Microphone Video light LCDIVJonitorNiewfinder I ndications DuringRecording DuringPlayback iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i!_i_i_i_i_i_!l iiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiii _,° pg. 25 for _.
  • Page 10 MENU Wheel [-, +] ........ _,° pg. 18 I_ Tape Remaining Time ......_:,_pg. 21 • BRIGHT Wheel [-, +] ......_,° pg. 11 I_ Recording Mode Indicator ....... _:_ pg. 20 • Speaker Volume Control [VOL.] ...._° pg. 11 I_ Video Light Indicator ........
  • Page 11 Set R EC MODE, S-VHS ( S-VHS ET), TAPE Load a tape (_,' pg. 8, "Loading/Unloading LENGTH and DATE/TIME inSYSTEM MENU. Cassette"). (_:,. pg.18- 22, " MENU SETTINGS") Set the Power Switch _ to "PLAY" while pressing down the Lock Button _) located on the 1 Remove the lens cap.
  • Page 12: Auto Focus

    BASICFEATUR Backiight Compensation To quickly increase the brightness of the subject relative to the background. 5Sec. (5.sec, Recording) 1) Press BACK LIGHT _)during recording. "1_1" is To record a scene for 5 seconds, providing quick displayed and the subject is brightened. scene transitions like those seen in TV 2) To cancel Backlight...
  • Page 13 Retake. This is between the video light and people or objects. normal. • Do not use near flammable or explosive materials. • It is recommended that you consult your nearest JVC dealer for replacing the video light.
  • Page 14 Tracki.g Ceunter Memery Eliminates noise bars that appear on-screen during Makes it easier to locate a specific tape segment. playback. To activate Manual Tracking: 1) Press COUNTER R/M _ and hold for more than 1) Press the TRACKING Wheel O for approx. 1 second.
  • Page 15 The S-Video cable is optional. Be sure to use the following cable: YTU94146A S-Video cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder.
  • Page 16 Using Cassette Adapter Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a S-VHS/ VHS VOR. 1) Slide the battery cover up to remove it, install one "AA (R6)" size battery, then reattach cover. 2) Slide the latch to open the compartment door, then insert the cassette and close the...
  • Page 17 During shooting Keep the lens cap attached the camcorder. Cassette holder • Viewfinder Turn the gear to take up slack. Speaker LCD monitor protection Microphone Video light LCDMonitorNiewfinder Indications During Recording During Playback c7 _pg. 25 for _.
  • Page 18: Brighten The Image

    CAMERA MENU MENU 1 Set the Power Switch _)to "_}" while pressing Manual exposure adjustment is recommended down the Lock Button _ located on the switch. the following situations: 2 Press the MENU Wheel O in. The Menu • When shooting using reverse lighting or when the Screen appears.
  • Page 19 Ifthewhite b alance iscorrect, all o ther colours will Allows you to superimpose one of eight preset beaccurately reproduced. titles. AUTO :White b alance isadjusted • 1_ shows the selected title which remains until automatically. OFF is selected. -:e:- FINE :Outdoors onasunny d ay.
  • Page 20 S-VHS REC appears during recording. OFF: Records in VHS on a VHS or S-VHS cassette. • JVC EHG (Extra High Grade) tapes are recommended for superior results. Use S-VHS tape for storing recordings for an extended period or for recording...
  • Page 21 Allows you toset t hetape length d epending onthe You can record sequentially at preset time spans. tape used: T20=20 minutes, T30=30 minutes, Leaving the camcorder aimed at a specific subject, T35=35 minutes, T40=40 minutes. you can record subtle changes over an extended •Tape r emaining time...
  • Page 22 Demonstrates certain functions automatically. To adjust the brightness of the LCD monitor, Available when t hePower Switch _)isset t o"1_" perform the following steps quickly (within approx. or"[]" and "DEMO M ODE" issetto"ON" (factory- 1 second by each interval): preset). Performing any operation during t he 1) Select "LOD BRIGHT"...
  • Page 23 Pregramme With Spec|a| Effects 1) Set the Power Switch _ to "[]" while pressing Fade/Wipe Effects down the Lock Button _ located on the switch. Fade- or wipe-in works at recording start, and fade- 2) Press RAE _ repeatedly until the desired mode or wipe-out works at recording...
  • Page 24 Digital Effects 1)Set the Power Switch _ to "[]" while pressing down the Lock Button _) located on the switch. 2) Press DIGIFECT _) repeatedly until the desired mode appears. • To cancel the effect, press DIGIFECT repeatedly until "OFF" appears. I2 SEPIA: Recorded scenes have a brownish...
  • Page 25 In this case, use an optional cleaning cassette. If the warning remains after cleaning, consult your nearest JVC dealer. E01--E06 UNIT IN SAFEGUARD MODE REMOVE REATTACH BATTERY: The error indications (E01 -- E06) show what type of malfunction has occured.
  • Page 26: Cassette Adapter

    Cassettes =Do not use near flammable or explosive materials, • It is recommended that you consult your nearest JVC dealer To properly use and store your cassettes, be sure to read the for replacing the video light. following cautions: 1.
  • Page 27 If malfunctioning occurs, stop using the unit immediately and that to which the receiver is connected. consult your local JVC dealer. Consult the dealer or an experienced radioiTV technician for help.
  • Page 28: White Balance Adjustment

    Dimensions : 113 mm x 117 mm x 199 mm Please consult your nearest JVC dealer for details (4-1/2" x 4-5/8" x 7-7/8") accessories and their availability. (W x H x D) (with the LCD monitor closed and...
  • Page 29 Enganche. DiE LA IBATER|A EfectQe el paso 1) de "CARGA DE LA BATERIA". Tiempo de grabaci6n aproximado (unidad: rain) Bateria Visor conectado Monitor LCD Empuje. conectado Conmutador BN-V11U alimentaci6n (45) (40) BN-V12U Conmutador BATTERY RELEASE (opcional) (45) (40) BN-V20U Bateria (opcional) (75) (70)
  • Page 30 ALIVIACENAMIENTO DE LAS PILAS: • Ya que el adaptador de CA procesa electricidad internamente, el mismo se calentar6, durante el Antes de almacenar los paquetes de pilas por un uso. Asegt3rese de utilizarlo s61o en Areas bien largo periodo de tiempo, asegurarse ventiladas.
  • Page 31 Si l aunidad comienza afuncionar mal, deje deusarla i nmediatamente yconsulte asuconcesionario local deJVC. GRABAC|6N Colocaci6alExtracci6n cassette 1) Retire el cubreobjetivo. Ajuste el conmutador 1) Abra completamente el monitor LCD y alimentaci6n _]_ en "Q o _" mientras presiona mant@ngalo alineado verticalmente con la el boton de bloqueo _) Iocalizado...
  • Page 32 REPRODUCC|6N 0 simplemente reproduzca la cinta en un VCR 1) Cargue una cinta. de VHS utilizando el adaptador de cassette. 2) Ajuste el conmutador de alimentaci6n _,.p. "PLAY" mientras presiona el bot6n de bloqueo _) Iocalizado en el conmutador. Para iniciar la reproducci6n, presione I_/11| _t.