Kyocera TASKalfa 650c Operator's Manual page 15

2.BASIC OPERATION
Enter the following items as required and click [OK].
2
IPv4 IP Address—Select this option to specify the device in the IPv4 address. If this option is selected, enter the
IPv4 address of your machine.
IPv6 IP Address—Select this option to specify the device in the IPv6 address. If this option is selected, enter the
IPv6 address of your machine.
Name—Enter the name of your machine.
Location—Enter the location of your machine.
[SNMP Settings]—Click this button when you need to verify and/or change the SNMP settings.
P.22 "Changing SNMP settings"
You must fill in the [Name] and [IP Address] boxes.
3 The device specified in step 2 is added to the list. Select the name of the added same
series MFP and click [OK].
The Remote Scan driver connects to the selected same series MFP, displaying the "HS Remote Scan Driver"
window.
The target same series MFPs may not be found due to the SNMP settings. In this case, verify and/or change
the settings using the SNMP Settings dialog box. For help, see the following section:
P.22 "Changing SNMP settings"
2 BASIC OPERATION
Connecting to the same series MFP 13