One Touch Recording (Otr) - Panasonic Omnivision VHS PV-M2046 Operating Instructions Manual

Record On a Tape
_Check list before you begin.
[] All connections are made (see page 5).
[] Your Combination VCR is plugged in.
Indicator TIMER
Indicator
INPUT
MENU j
o.
ROTATE TO SELECT
D_Y voR _. Pu_#o
666°(_
----0
_CH UP/
DOWN
WHEEL
.Insert a cassette with record tab.
I
The Combination VCR power I
comes on automatically.
[
l
Push CH UP or DOWN
or NUMBERED keys to
select a channel.
02
• Or, push the CH Up/Down
button on Combination VCR.
• To record from an outside
source, push the CH UP/DOWN to select LINE (see below).
SPEED
O
Push SPEED until the [
desired speed appears
l
on-screen.
• SP = Standard Play, LP = Long
Play, SLP = Super Long Play.
SLP
REC/TIME
@
Push REC/TIME
to start recording.
• Or, push the PLAY and REC/TIME
buttons on Combination VCR.
One Touch Timer Recording (OTR)
The Combination VCR stops recording
at a preset time.
Continue to push the REC/TIME button to
set the recording length.
Each Push will change the time as shown.
q: _ r mj 13 :_ c_.__:00_0_:131 b
• PROGRAM TIMER indicator lights on
the front panel.
• Push the PAUSE button to pause a
One Touch Recording in progress.
°21
SPECIFIC REC TIME
E PUSH REC KEY
I
After 2 seconds
4,
REC WHET ]
0:00:30 I
/ ((cSTEREO ÷ SLP I
/ (€_ SAP
/
MONO
/TO SET SPECI FIC REC TIME /
[PLEASE PUSH REC KEY J
Selecting the Input Mode
You can select the Input Mode in one of
three ways.
• Push the INPUT button.
The display will change in the
order below.
_-_ Channel Number---_LINE --_
• Push the CH UP/DOWN button.
The display will change in the
order below.
_=cIAlm 2-- 3
TV) (CATV)
(TV) _
LINE._--.125 or 694_ ----._
• Push the MENU button to display
the menu.
Then, use the WHEEL key to select
"TV" and then "INPUT SELECT."
Finally choose "TUNER" or "LINE."
Push STOP to
[_ stop recording.
• Or, push the STOP button
on Combination VCR.
{NOTES)
• While It is possible to change the tape speed when you are
recording, there will be some destortion on the tape where
the change occured.
• Push PAUSE to pause a recording in progress. (After the
Combination VCR has been Rec Pause mode for 5 minutes,
it will stop automatically to protect the tape and video head.)
• The recording time remaining will appear when the DISPLAY
button is pushed during OTR mode.
15