Vcr Plus+ Recording - Panasonic Omnivision VHS PV-M2046 Operating Instructions Manual

VCR Plus+ Programming
I_ Before you begin, make sure...
[] The clock is set.
[] VCR Plus+ Set Up is complete (See pages 20, 21).
I
PROGRAM
TIMER Indicator
Push VCR
VCR Plus+
b Plus+ to
display the VCR
Plus+ screen.
I LN I LR PLUSCODE
TO EXIT PUSH CLEAR
Push NUMBERED
Keys to enter the
PlusCode number.
• Refer to your local TV listings.
ENTER PLUSCODE
12
TO ENTER PUSH VCR Plus+
TO CORRECT PUSH CLEAR
To Make Corrections
Push the CLEAR button repeatedly to delete the PlusCode
number. Then, enter the correct number.
CLEAR
O
O
SPEED
Push VCR Plus+
VCR Plus +
to lock in your
b program.
Push 1, 2 or 3 Key to
select the program type.
1 ONCE
2 DALLY(MON-FRI)
3 WEEKLY
TO SELECT PUSH 1,2 OR 3
TO EXIT PUSH CLEAR
To change the recording speed:
Push the SPEEDbutton for SP, LP or SLP.
To cancel program contents:
Push the CLEAR button.
DATE START STOP CH 1
/
TO CHANGE RECORD SPEED I
PUSH SPEED KEY I
TO ACCEPT PUSH VCR Plus+ I
TO CANCEL PUSH CLEAR J
• If you use "A" connection on page 20, the channel shown in
the on-screen display in this step will always be the cable
box output channel number.
Use normal Timer Recording steps if:
• the PlusCode for a program is not listed.
• you anticipate the program, such as a sporting
event, to run over the scheduled stop time.
See page 17 to:
• Cancet a timer recording in progress
• Replace program contents
• Review or Clear program contents once set
Push VCR Plus+
VCR Plus+
to complete the
b program.
• The PROGRAM TIMER indicator
lights on the front panel.
• If you're using a Cable Box, make
sure that it is tuned to the desired
channel and the power is left on _or
timer recording.
LEAVE CABLE BOX POWER ON
FOR TIMER RECORDING
• This display appears
if you use a cable
box.
{NOTES}
• For a list of publications that carry the PlusCode numbers in your area, call 1 - 800 - 258 - 4827.
• You can obtain unlisted PlusCode numbers by calling 1 - 900 - 454- 7587. Call costs approximately $.93 per minute.
• Avoid overlapping program tfmes. .....
An on-screen display will ind cate if an inval d PlusCode number has beert entered.
An on-screen display will indicate when all timer programs are furl. ......
22