Table of Contents
Advertisement
Problem
disc messages
The following message will be shown on the screen when there is a format problem with the loaded disc:
"WRONG
REGIONAL
DISC"
Region code of the disc does not match the player's region code (region 1 to region6).
"WRONG
PASSWORD"
The rating level of the disc is higher than the rating level of the player.
The player will not play the disc.
"WRONG
DISC"
The player is equipped with automatic disc quality detection software. When the player
detects a problem or damaged disc, the unit may play at a lower quality or stop
completely, depending on the damage level.
DTS DISC
For OTSdigital audiostreamonly
No analogaudiooutput.
This player does not have a DTS decoder bulti-in ,which may result in no analog audio output if DTS
sound output is selected.
• Make sure you select Dolby 5.1 or 2 channel down mix instead of DTS setting.
• Connect the digital audio output (coaxial) to a digital amplifier, in order to enjoy DTS audio
system.
Power management
If the player will not be used for a long period
of time, please unplug the unit for your safety.
0
Advertisement
Table of Contents
