Connecting A Digital Tv Receiver - Sony KLV-23HR1 Operating Instructions Manual

hr_s_N[ ng and Cow_w_ecling theIV
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, PB and PR jacks to the Y, PB and P_ jacks on the TV. Use
the V1DEO 3 IN connections.
Note
Component video (Y, Pm P_0 connection is necessary to view 480p, 720p, and I080i
formats. Note that this TV displays all format types of picture in a resolution of 1280 dots
× 768 lines.
2
Using an AUD10 cable, connect the Digital TV Set-top box's AUD10
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, P_ and P_ jacks do not provide audio, so audio cables must be connected to
provide sound.
Digital TV Set-top box
Rear of TV
VMC-10HG (not supplied)
RK-74A (not supplied)
19