Connecting a Digital TV Receiver with component connectors
Digital TV Set-top box
Disconnect all power sources before making any connections.
z
Be sure to read the Set-top box manual.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P
B
✍
The Y, P
and P
B
be connected to provide sound.
✍
Component video connection is necessary to view 480i, 480p, 720p,
and 1080i formats. You may also use the S VIDEO or Composite
Video connections, however, component video (Y, P
provide the best picture quality for all format types.
2
Using an audio cable, connect the Digital TV Set-top box's Audio OUT
jacks to the LCD projection TV's AUDIO IN jacks.
VMC-10HG
(not supplied)
RK-74A (not supplied)
✍
You cannot record the signal from any equipment connected into the
Y, P
and P
connectors.
B
R
✍
This LCD projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
Installing and Connecting the LCD Projection TV
and P
jacks to the LCD projection TV.
R
jacks do not provide audio, so audio cables must
R
Rear of LCD projection TV
Y
P
B
P
R
AUDIO-R (red)
AUDIO-L (white)
, P
) will
B
R
39