Testing the Printer
After you charge the ink delivery system, you can use the built-
in self test to make sure the printer is working properly. You
can run the self test with paper from the built-in paper feeder or
by feeding a sheet manually. This section describes loading
paper in the paper feeder.
Loading paper in the paper feeder
1.
Open the paper feeder cover and lift the paper separator.
2. Fan a stack of letter-size or A4 paper; then tap it on a flat
surface to even the edges.
Note:
The paper feeder holds up to 100 sheets (64 g/m2 or 16 lb maximum).
Setting Up Your Printer 1-13