Table of Contents
Advertisement
MAINTENANCE
WARNING: THE STEAMER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,
CLEANING OR SERVICING THE STEAMER.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
DELIMING
Refer to the water filter manual shipped in the box with your steamer.
LUBRICATION
Once each month, lubricate the thrust screw of each compartment door. To access the thrust screw,
open compartment door and turn handwheel fully clockwise until gasket plate is fully extended. Grasp
finger hooks and lift up to remove gasket plate assembly. Apply grease (order part 880786 from your
Vulcan servicer) to the thrust screw while rotating the handwheel to assure complete coverage.
Replace gasket plate assembly. Turn handwheel fully counterclockwise to retract gasket plate into
door. Close door.
DOOR GASKET
If the door gasket becomes damaged from nicks or cuts and steam leakage results, contact your
Vulcan-authorized servicer to have the gasket replaced.
SERVICE
Contact your local Vulcan-authorized service office for any repairs or adjustments needed on this
equipment.
FORM 30914 Rev. A (Jan. 2003)
– 12 –
PRINTED IN U.S.A.
Advertisement
Table of Contents
