16
|
Setting Up the Printer On a Network
Note: If you don't know
which setting to use, see
your network administrator
for help configuring the
printer's IP settings.
Configuring the Network Interface
1. Make sure that the printer is turned on and the LCD displays
2. Press the
r button on the printer's control panel to enter the
Menu
printer's menu system.
3. Press d to highlight
4. Press r then d to highlight
5. Press
Enter. An asterisk appears next to
selected.
6. Press l then d to highlight
7. Press r and then u or d to choose one of the following IP configuration
settings:
Select this setting if your network uses a DHCP server to
•
AUTO:
configure your network devices' IP settings automatically.
Select this setting if you would like to configure the
•
PANEL:
printer's IP settings manually.
8. Press
Enter. An asterisk appears next to the setting you selected.
9. Press l to go back. Then do one of the following:
If you selected
•
+ Cancel button to exit the printer menu. Then continue with
step 14.
If you selected
•
with step 10.
10. Press d to highlight
displays the
IP ADDRESS
11. Press u or d to change each octet value, then press r to select the next
octet. When you have changed the value of the last octet, press
LCD displays the
1-16
NETWORK SETUP
ENABLE.
IP ADDRESS SETTING
as the IP ADDRESS SETTING, press the
AUTO
as the IP ADDRESS SETTING, continue
PANEL
IP, SM, DG SETTING
.
.
SUBNET MASK
READY
, then press r.
to show that it's
ENABLE
.
, then press r. The LCD
.
. The
r