Vox AGA150 Owner's Manual page 8

10. [MIDDLE] control
11. [TREBLE] control
12. [COLOR] control
13. [REVERB] control
14. [CHORUS] switch
15. [MASTER] volume control
8
8. [CLIP] indicator
This indicator lights up if the volume level of the connected musical instrument is too high. Clipping
could distort the sound and reduce the sound fidelity. To avoid clipping, use the [GAIN] switch and
[VOLUME] control to adjust the volume level.
9. [BASS] control
These controls enable you to adjust the tone in the low, mid and high ranges respectively.
NOTE:Turn each control clockwise to enhance the corresponding range. Please note that too much en-
hancement could cause feedback.
This control enables you to adjust the tonal color to fit your playing style and situation. Turn the
control counter-clockwise for a fat and sound, and turn it clockwise for a cleaner and "chimier" sound.
This control enables you to adjust the reverb effect. Turn the knob clockwise for more reverb.
This switch turns the chorus effect on and off. When the switch is turned on, the indicator above the
switch lights up.
This control enables you to adjust the overall volume level of the Normal and Tube Pre channels.
NOTE:The [MASTER] volume control does not affect the signal level at the [DI OUT], [TUNER OUT],
[AUX IN] or [LINE IN] connectors.