Emulation
FUNCTIONS
Epson (TM-88)
Paper low detect (? 1)
SW
6
(? 1) The detecting function of [Paper Low] is an option.
Please set Dip Switch (2-6) [OFF] if you don 't need any option.
If Dip Switch is [ON] without any special option purpose. Printer detects
[Paper is Low] and it could cause error.
?
CAUTION:
Turn off the printer while removing the DIP switch cover to prevent an electric short, which
can damage the printer.
1. Make sure the printer is turned off.
2. Remove the screw from the DIP switch cover. Then, take off the DIP switch cover as
shown in the illustration below.
3. Set the switches using a pointed toll, such as tweezers or a small screwdriver.
4. Replace the DIP switch cover. Then, secure it with the screw.
SW-4
OFF
FUNCTIONS
Paper Low
Detect
Page - 11-
SW-5
OFF
ON
OFF
Do not Detect