Installing The External Serial Ata Adapter Bracket; Connecting The External Serial Ata Adapter Bracket - Intel DQ35JO - Desktop Board Executive Series Motherboard Product Manual

Installing the External Serial ATA Adapter
Bracket
If you are connecting the external Serial ATA (eSATA) adapter bracket to the Desktop
Board, follow these instructions (see Figure 23):
1. Observe the precautions in "Before You Begin" on page 31.
2. Attach the connector at the end of the adapter cable to the red SATA connector
(Figure 23, B) on the Desktop Board.
3. Secure the bracket to the chassis back panel with a screw (Figure 23, A).
NOTE
Do not use the red external SATA (eSATA) connector to connect to an internal
SATA drive.
Figure 23. Connecting the External Serial ATA Adapter Bracket
Installing and Replacing Desktop Board Components
49