A Few Precautions - Epson Stylus PRO 10000CF Startup Manual

Do not attempt to service the printer yourself.
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the
printer; the printer has been dropped or the cabinet damaged;
the printer does not operate normally or exhibits a distinct
change in performance.
The interface connectors (including Type B interface card) and
the connector for optional Auto Take-up Reel Unit are Non-
LPS (non-limited power source).
If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and over-
current protection for this printer, the building installation
must be protected by a 10 or 16 amp circuit breaker.
Bei Anschluss des Druckers an die Stromversorgung muss
sichergestellt werden, dass die Gebäudeinstallation mit einer
10 A-oder 16 A-Sicherung abgesichert ist.

A Few Precautions

When using the printer
Do not put your hand inside the printer or touch the ink
cartridges during printing.
Do not move the print heads by hand; otherwise you may
damage the printer.
2
Safety Instructions