Unpacking And Handling - Jenn-Air PRD3030 Installation Manual

UNPACKING AND HANDLING

MOVING AND PLACING THE RANGE
The ranges have shipping weights varying from 420
lbs. to 630 lbs. less approx. 50 lbs. after removal of
packing material. It is recommended that the door,
grates, and front kick panel be removed to facilitate
handling. This will reduce the weight for ease of
handling.
CAUTION:
Proper equipment and adequate manpower must be used in moving the range
to avoid damage to the unit or the floor. The unit is heavy and rests on
adjustable steel legs.
WARNING:
DO NOT lift range by the oven door handles!!
It may be necessary to remove the oven doors and knobs to pass through some doorways. With the
doors and knobs removed, a 29-1/16"(PRD3630)/28-1/2"(PRD3030) wide opening is required. Without
removing the door, a 31-1/2" (PRD3630) / 30" (PRD3030) wide opening is required. Remove the outer
carton and packing material from the shipping base.
5
Kick Panel
Fig. 2
Left Rear
Left Rear Shipping
Shipping Screws
Screws
Fig. 3