Quick Installation - ViewSonic PerfectFlat PF77 User Manual

Full 17" (16.0" diagonal viewable) color monitor
Hide thumbs Also See for PerfectFlat PF77:
Table of Contents

Advertisement

Quick Installation

1 Connect video cable
Make sure both the monitor and the
computer are powered OFF. Connect
the video cable from to the back of the
monitor to the computer.
Macintosh
®
users: Connect a
Macintosh adapter (part No. VMAC-1) to
the video cable, then to the monitor. To
order an adapter, send an email to
vsparts@viewsonic.com or call
®
ViewSonic
customer service (see the
back cover of this guide). You will need
to provide your monitor's serial number.
2 Connect power cord
Connect the power cord from the back
of the monitor to a properly grounded
AC outlet, then to the monitor.
3 Power-ON monitor* and
computer
Power-ON the monitor, THEN power-
ON the computer.
NOTE:
• This sequence (monitor before
computer) is very important.
• At this point Windows
may receive a message asking
them to install the PF77s INF file.
* The monitor automatically degausses each time you turn it on, removing the build-up of
magnetic fields that can affect color purity and convergence. You can also degauss the
monitor by selecting Degauss from the menu shown in the next section of this guide. Do not
degauss repeatedly. Doing so can be harmful to the monitor. Wait 20 minutes between turning
the monitor off and on again.
AC Outlet
Power cord
ViewSonic PF77
4 Install INF and ICM files
5 Windows users: Setting the
Installation is complete!
Enjoy your new monitor!
To be best prepared for any future customer
service needs:
• Write the serial number (see back of the
• Register the warranty of your monitor on the
®
98 users
Monitor
Analog video port
(D-sub)
Digital video port
(DVI-V)
Digital video cable
Analog video cable
• For CD-ROM: Insert the CD-ROM into
your system, wait for it to auto-start,
select "Monitor Drivers," and follow the
on-screen instructions.
• For diskette: Insert the diskette into
your system, run install.exe, and
follow the on-screen instructions.
Timing Mode
See page 6 for procedures to set the
timing mode.
monitor) in "For your Records" on page 1 of
this guide.
Internet at: http://www.viewsonic.com
Back of computer
5
Getting Started
E
N
G
L
I
S
H

Advertisement

Table of Contents
loading

This manual is also suitable for:

Perfectflat vcdts21574-1

Table of Contents