6.23
Set Vertical Print Page Line Mode "EX" 06H 00H 00H 00H 00H 00H 14H m1
Format:
"EX" 06H 00H 00H 00H 00H 00H 14H m1
Parameters:
Parameter m1 is one byte binary code, and indicates the state as follows:
Set Vertical Print Page Line Mode m1
Off
On
Reserved
Function:
-
The default environment vertical print page line mode is set.
-
If the paper width is set previously, and the actual paper width is longer than
setting, it prints vertical lines at a width of 1 dot on the horizontal position
within setting paper width from the top margin position to the bottom position.
-
If the paper width is not set yet, it doesn't print.
-
If parameter m1 is out of range, this command is ignored and the existing
setting is maintained.
-
This command is only valid in remote mode.
EPSON Imaging Technology Center
Revision: 1 (Date: 6/20/00)
00H
01H
02H - FFH
Page: 48