Epson PictureMate Flash PM 280 Basics Manual page 52

7
Slide the lever all the way right, to the Lock
position.
Caution: If the cartridge is not inserted correctly,
PictureMate will not be able to print.
8
Close the cartridge door all the way.
PictureMate starts charging and displays a
message.
9
When it's finished charging, press OK.
Checking Print Pack Status
You can check the status of your Print Pack at any time.
1
Press Menu.
2
Press u or d to highlight Maintenance, then press
OK.
3
Highlight Check Print Pack Status and press OK.
You see the status displayed on the photo viewer
screen:
4
Press OK to exit.
Note: If the screen displays a Print Pack low message, you
should buy a new PictureMate 200 Series Print Pack. See
page 48 for details.
51