Epson PictureMate Flash PM 280 Basics Manual page 24

5
Press l, r, u, or d to browse the frames.
Tip: You can display 1, 6, or 15 frames at a time by
pressing Display . If you display one frame at a
time, the currently selected photo is shown in the frame.
6
When the frame you want to use is highlighted,
press OK.
7
At the next screen, select whether to apply the
frame to the current photo or all photos, then
press OK.
You see your photo(s) in the frame you selected.
● If necessary, press
photo at full size with the frame.
● If your photo doesn't fit in the frame, you can
crop it and adjust the picture area. Press
Menu, select Edit, and select Crop Photo.
Follow the instructions on page 17.
8
Press OK to select the current photo for printing.
(See page 9.) Or you can print all photos
(page 10) or a range of photos (page 11).
9
Adjust any other settings you want, then press
Print to start printing.
Display to view each
Decorating Photos
You can add fun and festive decorations to your
photos from PictureMate's built-in clipart collection.
You can add up to four decorations to each photo.
1
Select a photo that you want to decorate.
2
Press Menu.
3
Press u or d to highlight Edit, then press OK.
4
Press u or d to highlight Decorate Photo, then
press OK.
5
Press u or d to highlight Add Decoration, then
press OK. You see a selection of decorations.
6
Press l or r to browse the images. When the
image you want to use is highlighted, press OK.
You see the decoration centered on your photo:
23