Table of Contents
Advertisement
POWER switch
ON position. Push this switch on and you will hear the print head
prepare itself for printing.
ON LINE switch — This switch allows you to switch back and forth
from on-line to
to receive data from the computer. When the printer is off-line, it is not
ready.
ON LINE light — The red light, located above the ON LINE switch,
indicates whether the printer is on or off line. The light glows red when
the printer is on-line, and when the light is off, the printer is off-line. If
you turn the power ON without any paper in the printer, the ON-
LINE light will not glow, even if you press the ON-LINE switch.
The ON LINE light blinks when the motor has locked or the battery
is low. When the light is blinking, first check to see if the paper or
ribbon cassette is stuck. If either of these is stuck, turn the power off
and correct the problem. The ribbon cassette should return to the
starting position on the left side when you turn the power back on. If
you can not find anything wrong with the printer, the blinking light is
indicating that your battery is low. Turn the power OFF and plug in
the AC adapter as described later in this chapter.
PAPER FEED switch
advance the paper one line at a time. You can only activate this switch
when the printer is off-line. Tap this switch to advance the paper one
line at a time. Hold the switch down to advance the paper several lines
at once.
Paper control switches
There are two switches located on the right side of your printer
(Figure
These switches allow you to make certain adjustments to
2-2).
improve the print quality on your paper.
DENSITY switch —
Move the switch toward the back of the printer to make the print
lighter; move the switch toward the front of the printer to make it
darker.
16
— This switch activates the power when it is in the
status. When the printer is on-line, it is ready
off-line
— This switch allows you to automatically
This switch makes the print lighter or darker.
Advertisement
Table of Contents
