Safety Information; Safety Labels; Protection Features; End Of Life Disposal - Bematech MP-4000 User Manual

MP-4000 TH . Revision 1.2

Safety Information

This section presents important information intended to ensure a safe and effective use of this
product. Please read this section carefully and store it in an accessible location.
Warning
- Immediately unplug the equipment if it produces smoke, a strange odor, unusual
noise or if foreign matter (including water or other liquid) falls into the equipment. Continued
use may damage it or lead to fire *.
- Please contact your dealer or a Bematech service center for advice.
- Never attempt to repair this product yourself. Improper repair work can be dangerous.
- Never disassemble or modify this product. Tampering with this product may result in
injury or fire *.
- Be sure to use the specified power source. Connection to an improper power source
may cause malfunction or fire *.
- Do not connect a telephone line to the Printer Drawer Connector; otherwise, the
product and telephone line may be damaged.
Caution
- Do not connect cables in ways other than those mentioned in this manual. Different
connections may cause equipment damage and fire *.
- Be sure to set this equipment on a firm, stable surface. The product may break or
cause injury if it falls.
- Do not install this equipment in locations that do not comply with the environmental
requirements specified in this manual.
- Do not place heavy objects on top of this product. Never stand or lean on this product.
Equipment may fall or collapse, causing breakage and possible injury.
- To ensure safety, unplug this product before leaving it unused for an extended period.
In this case, please be sure to place a piece of paper between the platen and the paper roll, in
the thermal mechanism, to avoid damage when restarting the printer.
* Note that this equipment has been developed in compliance with international safety
standards and therefore contains only limited flammability components.
10.

Safety Labels

Caution
The thermal head is a hot surface. Do not touch.
11.

Protection Features

The product has a safety feature that slows printing in the event that excessive printing would
cause the printer to overheat. This feature protects the printer hardware from potential
damage and should not be noticeable during normal operation.

End of Life Disposal

Bematech encourages owners of information technology equipment (ITE) to responsibly
recycle their equipment when it is no longer needed.
9