Emc, Safety And Other Applicable Standards; Fcc Compliance Statement; Rohs - Bematech MP-4000 User Manual

MP-4000 TH . Revision 1.2

EMC, Safety and Other Applicable Standards

Product Name: MP-4000 TH
The following standards apply only to the products that are so labeled.
(EMC is tested using the Wearnes WDS060240 power supply).
North America:
Europe:
México:
5.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC
emission limits. Bematech is not responsible for any radio or television interference caused by
using other than recommended cables and connectors or by unauthorized changes or
modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
CE Marking
The product conforms to the following Directives and Norms:
Directive 89/336/EEC
This product has been tested and found to comply with the limits for Class A Information
Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for
Class A equipment were derived for commercial and industrial environments to provide
reasonable protection against interference with licensed communication equipment.
Important: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
6.

RoHS

This product complies with the RoHS 2002/95/EC Directive from the European Community.
EMI: FCC Class A
CE Marking
EN 55022 Class A
EN 55024
IEC 61000-3-3
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
Safety: UL 60950
Safety: EN 60950
Safety: NOM-019-SCFI-1998
7