History Window - HP StorageWorks P9000 User Manual

Table 20 Display Filter dialog box (continued)
Field
Attribute
Pair Status
NOTE: If you select Cascade, you cannot select Reserved. If you select L1-L2, you cannot select
any other check boxes.
If the check box of Business Copy or Snapshot is not selected, all the check boxes in each tab will
be grayed out.

History window

The History window shows the history of operations performed on Business Copy and Snapshot
pairs and data associated with the operations.
The upper pane shows Business Copy history.
The lower pane shows Snapshot history.
NOTE: A P-VOL or S-VOL LDEV number that ends with a pound or gate symbol (#) indicates that
the LDEV is an external volume (e.g., 00:00:01 #). An LDEV number that ends with a letter "X"
indicates that the LDEV is a virtual volume used by Thin Provisioning (e.g., 00:00:01 X).
You can change the display order by clicking a column title. The list sorts based on the clicked
column. Clicking a second time changes the order ascending or descending.
Fields in the Business Copy pane are described as follows:
64 Business Copy GUI reference
Description
Volume Attribute. If you select the Reserved check box, only reserved volumes display.
Reserved volumes include volumes specified as S-VOLs.
Pair Attribute. You can choose to display pair volumes, non-pair volumes, or cascade
levels (L1 or L2). You can select either of the following radio buttons:
- L1: Displays L1 pairs only.
- L1-L2: Displays both L1 and L2 pairs in hierarchical structure.
Select the statuses of the pairs you want to see.