Table of Contents
Advertisement
ESC ?
Format:
ASCII code:
Decimal:
Hexadecimal:
Explanation:
Change one graphics mode to another. The mode s is the ASCII
code for the character K, L, Y, or Z which is reassigned to a mode
O-6 as in the ESC * command. Details of the modes are given in
Chapter 9.
ESC A
Format:
ASCII code:
ESC
Decimal:
27
94 (m) (n1) (n2) (data1)(data2) . . .
Hexadecimal:
1B
5E (m) (n1) (n2) (data1)(data2) . . .
Explanation:
Turns on Y-Pin Graphics Mode. The variable m defines density
of print (0 for single and 1 for double) and d is the total number
of dots required. nl and n2 are calculated thus:
nl=d MOD 256 and n2=INT (d/256).
and are followed by two times d data bytes. The printer expects
two data items for each column of print.
Miscellaneous Codes
CR
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : 0 D
Explanation:
Prints the data in the buffer and returns the print position to
the left margin. A line feed may also be added if either 2-3 is
ON or the AUTO PEED XT line on the parallel printer interface
is held Low.
ESC
27
1B
^ (m) (n1) (n2) (data1)(data2) . . . (data(d))
CR
13
Reassign Graphics Mode
?
(s)
63
(s)
(s)
3F
Select 9-Pin Graphics Mode
(n)
(n)
(n)
(data(d))
(data(d))
Carriage Return
C-23
Advertisement
Table of Contents
