Dot Graphics - Epson LX-86TM User Manual

ESC &
Format:
ASCII code:
Decimal:
Hexadecimal:
Explanation:
This command allows characters to be re-defined in the cur-
rently selected mode.
ESC %
Format:
ASCII code:
Decimal:
Hexadecimal:
Explanation:
This code selects the user-defined set if n = 1 and the normal set
if n=0. ESC & is required to define the character set.

Dot Graphics

Note: See Chapter 9 for further information on dot graphics.
ESC K
Format:
ASCII code:
ESC
Decimal:
27
Hexadecimal:
1B
Explanation:
Turns on Single Density Graphics Mode, printing 480 dots per
8-inch line. If d is the total number of dots required, nl and n2
are calculated thus:
nl=d MOD 256 and n2=INT (d/256).
and are followed by d data bytes.
c-20
ESC & NUL (data1) (data2) . . . (data n)
2 7 3 8
1B 26 00 (data1) (data2) . . . (data n)
ESC
27
1B
Select Single Density Graphics Mode
K (n1) (n2) (data1) (data2) . . . (data(d))
75 (n1) (n2) (data1) (data2) . . . (data(d))
48 (n1) (n2) (data1) (data2) . . . (data(d))
Define User-Defined Characters
0 (data1) (data2) . . . (data n)
Select User-Defined Set
% (n)
37 (n)
25 (n)