HP D2D Installation And Configuration Manual page 40

Figure 33 Advanced settings CHAP
If you want to use mutual authentication, which means that the target must also log on to the Initiator,
make sure that the Perform mutual authentication box is checked. You must also provide the Target
User Name and Secret on the Devices page in the Web Management Interface.
Persistent Targets tab
The Persistent Targets tab shows the targets that have been configured to restore automatically on
reboot. During initial configuration, it is for information only. However, if you want to stop the host
automatically connecting to a device, you must select the device on this tab and Remove it. To
disconnect the device without rebooting, go back to the Targets tab, select the device, click Details
and log off.
Figure 34 Persistent Targets tab (iSCSI)
40 Advanced installation