The Remote UI is not displayed.
The machine's IP address is not set correctly.
Enable the DHCP function for the wireless LAN router or access point, and
specify the setting again.
The wireless LAN routers or accesspoint network key is not correctly specifi ed to the machine.
Check the wireless LAN routers or access point network key.
(
Specify the settings again.
Selected the wrong SSID.
Check the wiress LAN or accesspoint's SSID.
(
Specify the settings again.
<Wireless LAN Settings> cannot be selected because it is grayed out in the Network Set-
tings menu.
Connection method for the machine is set to <Wired LAN>.
Switch the connection method to <Wireless LAN>.
Proceed to "Step4-A Setting the Machine Using the WPS (Push Button Mode), " on P.1-4.
Proceed to "Step4-B Setting the Access Point Manually and Connecting, " on P.1-6.
Proceed to "Checking SSID or Network Key, " on P.1-6.
Proceed to "Step4-B Setting the Access Point Manually and Connecting, " on P.1-6.
Proceed to "Checking SSID or Network Key, " on P.1-6.
Proceed to "Step4-B Setting the Access Point Manually and Connecting, " on P.1-6.
Proceed to "Step2 Switching the Connection Method to Wireless LAN, " on P.1-2.
Troubleshooting
2-5