Epson EX-1000 User Manual page 97

E S C \
Format:
Determines the position (relative to the current position) at which
printing of following data will start. To find nl and n2, first calculate
the displacement required in 1/12Oths of an inch. If the displacement
is to the left, subtract it from 65536. Send the resulting number using
this formula: total number of dots = nl + (256 x n2). The
command is ignored if it would move the print position outside the
current margins.
Horizontal tabbing
HT
Format:
Comments:
Advances the print position to the next horizontal tab setting. The
default settings are at intervals of eight characters in the default pitch,
and tab positions are not affected by subsequent changes in character
pitch.
Command Summary
Set Relative Position
Tab Horizontally
A-21