Setting The Switches - Epson EX-1000 User Manual

For the parity setting you have three choices: odd, even, or non-
parity Use either odd or even unless your computer requires non-parity
Again, be sure that the settings on your printer and computer match.

Setting the Switches

The interface you use and the type of parity check for a serial
interface are set with DIP switches 2-5 and 2-6:
Table C-1. Interface type
DIP switches 2-7 and 2-8 determine the baud rate when the built-in
serial interface is used. They have no effect on any optional interfaces
or on the built-in parallel interface. Therefore, if you use the serial
interface only occasionally you can still leave these switches set the way
you want them.
Note: Shaded items are the factory settings
C - 2
The Serial Interface