Status And Error Messages - Epson EPL-N2010 Reference Manual

Status and Error Messages

This section contains an alphabetical list of the status, error, and
warning messages that appear in the control panel display.
If Auto Continue is turned on in the printer driver or the SelecType,
some error messages are not displayed even though the problem
remains. Ordinarily, you should leave Auto Continue off.
Check Paper Size
The paper size setting is different from the size loaded in the
printer. Check to see if the correct size of paper is loaded in the
tray; then press the Continue button.
If you turn on Size Ignore in the SelecType Config menu or the
printer driver, this menu does not occur.
Check Paper Type
The paper type setting on the printer driver's Basic Settings menu,
or in SelecType, is different from the type of paper loaded in the
printer. Make sure the correct type of paper is loaded in the
printer; then press the Continue button to clear the message.
Collate was disabled
The printer does not have sufficient memory to collate print jobs.
Only one set of copies will be printed. Reduce the contents of print
jobs or add more memory in your printer. Press the Continue
button to clear the message.
6-14
Troubleshooting and Maintenance