Status And Error Messages - Epson AcuLaser C4000 Quick Reference

Status and Error Messages

This section contains a list of error messages
shown on the LCD panel, giving a brief
description of each message and suggestions
for correcting the problem. Note that not
every message shown on the LCD panel
indicates a problem.
Calibrating Printer
The printer automatically calibrates itself
when any of its covers are opened and when
there is no paper jammed inside. This is not
an error message, and will clear itself within
one minute. While the printer displays this
message, do not open the covers or turn off
the printer.
Cancel All Print Job
The printer is canceling all print jobs in the
printer memory, including jobs the printer is
currently receiving or printing. This
message appears when the q Job Cancel
button has been pressed down for more than
two seconds.
Cancel Print Job
The printer is canceling the current print job.
This message appears when the q Job Cancel
button has been pressed and released within
two seconds.
Can't Print Duplex
The printer has encountered problems
during duplex printing. Make sure you are
using an appropriate type and size of paper
for the duplex unit. The problem could also
be a result of incorrect settings for the paper
source you are using. Pressing the N
Start/Stop
button
print job on only one side of the paper. Press
the q Job Cancel button to cancel the print
job.
will print the rest of the
EPSON AcuLaser C4000 Quick Reference
Check Transparency
You have loaded media other than
transparencies when the Paper Type setting
in the printer driver is Transparency, or
transparencies are loaded when the Paper
Setting in the printer driver is not set to
Transparency. Paper is jammed at the MP
tray.
Remove the paper from the MP tray and
remove the jammed paper from the MP tray.
Open and close cover A to clear the message
on the LCD panel, then reload the paper. The
printer resumes printing from the page that
jammed.
Check Paper Size
The paper size setting is different from the
size of paper loaded in the printer. Check to
see if the correct size of paper is loaded in the
specified paper source.
To clear this error, select Clear Warning
from the control panel's Reset Menu. For
instruction about accessing the control panel
menus, see "How to access the control panel
menus."
Check Paper Type
The media loaded in the printer does not
match the paper type setting in the printer
driver. Media that matches only the paper
size setting will be used for printing.
To clear this error, select Clear Warning
from the control panel's Reset Menu. For
instruction about accessing the control panel
menus, see "How to access the control panel
menus."
C Toner Cart Out
See "XXXX Toner Cart Out."
(4/22)