Entering The Pattern Data - Brother Simplicity SB3129 Operation Manual

UTILITY STITCHES ——————————————————————————————————————————————————

Entering the pattern data

Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
1 Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 37).
2 Turn on the sewing machine.
3 Press (stitch selection key) in the
operation panel.
The screen containing the various types of
stitches appears.
4 Press , ,
is selected, and then press
key).
The screen for entering a pattern appears.
1
2
1 Number of the current point/Total number of
points
2 Horizontal coordinate (0–75)
3 Vertical coordinate (0–14)
Check the grid sheet set, and specify the
5
coordinates of the first point.
Press and to select the horizontal
coordinate and press
vertical coordinate, and then press
key).
124
and (arrow keys) until
(OK
3
and to select the
(OK
6 Specify the coordinates of the second point,
and then press
A screen appears, allowing you to specify
the settings for the stitching between the
two points.
7 Specify whether single stitching or triple
stitching will be sewn between the points.
Press and to select
or for triple stitching, and then press
(OK key).
A screen for selecting the next operation
appears.
8 Select , and then press
• If you make a mistake while specifying a
point, press the C key to erase the last point
specified.
A screen for specifying the next point
appears.
6
9 Repeat steps through
point.
Up to 99 points can be entered.
0 After all points in the pattern have been
specified, select
8
in step , and then press
(OK key).
for single stitching
(OK key).
8
to specify each
in the screen that appears
(OK key).