Advertisement
Using
the
S-Link
function
with
S-Link
capable
Sony
VCRs
The S-Link feature allows you to operate
the projection
TV and VCR with the S-Link function
in the following
ways:
• When you press the VCR's play button,
the
projection
TV's input mode is automatically
changed
to video input which is connected,
and the VCR
starts playing
a tape.
• You can turn off tile projection
'IV and VCR
together
using the SYSTEM OFF button
(see page 38
for details).
Notes
• The projection
TV may malfunction
if you connect
the S-Link
cable to the projection
TV without
connecting
the other
end of
the cable to the VCR.
• When
making
the S-Link
connection,
be sure to insert
all the
connectors
firmly.
• The same
terminals
are used for both S-Link
and CONTROL
S.
VCR
AUDIO
VIDEO
_,,_ ,, [® ® @Is.u,,
J
Audio/video
cable
(not
supplied)
VIDEO
(yellow)
(Rear of projection
TV)
CENTER SP£XKER In
_WINOM_WIUA X/I_
Connecting
other
Sony
equipment
with
CONTROL
S jack
This feature allows you to control your projection
TV
and other Sony equipment
with one remote
commander.
• To control other Sony equipment
with the projection
TV's remote commander,
connect the input of the
equipment
to CONTROL
S OUT jack on the
projection
TV.
• To control the projection
TV with the remote
commander
of other Sony equipment,
connect the
output of the equipment
to CONTROL
S IN jack on
the projection
TV.
Note
• The same terminals are used for both S-Link and CONTROL S.
(Rear of projection
TV)
.... 0
Getting
Started
13
-EN
Advertisement
