Advertisement
Using
the
projection
TV speakers
as center
speakers
This feature allows you to enjoy the benefits of Dolby
Pro Logic by using the speakers
of the projection
TV as
the center speaker.
To utilize this system, you must
connect an amplifier
that is Dolby Pro Logic
compatible.
Connect the speaker
wires from the
amplifier's
center channel output
terminals
to the
projection
TV's CENTER SPEAKER IN. Both right and
left terminals
must be connected
to receive an audio
signal.
After making
the right connections,
select
"SPEAKER: CENTER" in the AUDIO menu (page 29).
The left and right audio channels
can be heard through
your audio system speakers.
In this connection,
adjust the volume with your
amplifier.
Notes
• Always
match
the speaker
cord and terminal
colors
when
making
the connections.
• Unplug
the projection
TV when
making
the connections.
If the
exposed
speaker
cord
wires touch
while
the projection
TV is
plugged
in, the projection
TV may short-circuit
and be
damaged.
• Do not pull on the speaker
cords.
• Always
turn off the amplifier
power
before
connecting
to the
CENTER
SPEAKER
IN terminals.
• When using
the projection
TV speakers
as center
speakers,
the
subwoofer
is disabled.
(Rear of projection
IV)
I v,xo i_,_o: Iv,_o 3 out
_lTo_
vl01( _
rL
tn
s-tml
S-LJmll
_T_OLS
@
@
ol
i R-I_
Dolby*
Pro Logic-
compatible
amplifier
to
I center
I Speaker
I cords
* Manufactured
under
license
from Dolby
Laboratories
Licensing
Corporation.
Additionally
licensed
under
one oJ
more
of the following
patents:
U.S. numbers
3,959,590.
Canadian
numbers
1,004,603
and 1,037,877.
"Dolby',
"Pro
Logic",
and the double-D
symbol
rid are trademarks
of Dolby
Laboratories
Licensing
Corporation.
12-EN
Getting
Started
Advertisement
