Specifications - Sony XM-404EQX Operating Instructions Manual

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
40 watts per channel minimum continuous average power into 4 ohms,
four channels driven from 20 Hz to 20 kHz with no more than 0.04%
total harmonic distortion per Car Audio Ad Hoc Committee standards.
Other Specifications
Circuit system OTL (output transformerless) circuit
Pulse power supply
Inputs RCA pin jacks
High level input connector
Outputs Speaker terminals
Speaker impedance 2 - 8 _ (stereo)
4 - 8 _ (when used as a bridging
amplifier)
Maximum outputs Four speakers:
80 watts x 4 (at 4 _)
Three speakers:
80 watts x 2 + 200 watts x I (at 4 _)
Two speakers:
200 watts x 2 (at 4 Q)
Rated Outputs (supply voltage at 14,4 V)
Four speakers:
40 watts x 4 (20 Hz
20 kHz, 0.04 %
THD, at 4 f2)
50 watts x 4 (20 Hz - 20 kHz, 0.1%
THD, at 2 _0
Two speakers:
100 watts x 2 (20 Hz - 20 kHz, 0.1%
THD, at 4 fl)
Frequency response 5 Hz - i00 kHz ( _ dB)
Harmonic distortion 0.005 % or less (at lkHz, 4 fl)
Input level adjustment range
0.2 - 4.0 V (RCA pin jacks)
0.4 - 8.0 V (High level input)
High pass filter 50 - 200 Hz, -12 dB/oct
Low-pass filter 50 - 200 Hz. -12 dB/oct
Equalizer 50 Hz, 200 Hz, 800 Hz, 3.2 kHz,
12.8 kHz
-+12dg
lg V DC car battery
(negative ground)
10.5 - 16 V
at rated output: 23 A
Remote input: 1.5 mA
Approx. 260 × 55 x 320 mm
(w/h/d) (10 i/, x Z i/, x 125/8 in.) not
incl. projecting parts and controls
Mass Approx. 3.2 kg (7 lb. 1 oz.) not incl.
accessories
Supplied accessories Mounting screws (4), Terminal cap (1)
Optional accessories Connecting cord for power ampliPmr
RC-46
Power requirements
Power supply voltage
Current drain
Dimensions
Design and specifications are subject to change without
notice.
R