Sony KP-57WV600 Operating Instructions Manual page 93

Video
No picture
(screen not lit), no sound
_1 If your TV does not turn on, and a red light keeps flashing, your TV may
need service. Call your local Sony Service Center.
J Make sure the power cord is plugged in.
_1 Press the POWER button on the front of the TV.
Press the TV/VIDE0 button to cycle through the connected video sources.
J
J Try another channel; it could be station trouble.
Dark, poor or no J Adjust the Picture option in the Video Menu (see page 72).
picture (screen lit), J Adjust the Brightness option in the Video Menu (see page 72).
gO)0 d sound
,.i Check the antenna/cable connections.
No color Adjust the color option in the Video Menu (see page 72).
Only snow and noise _ check the antenna/cable connections.
appear on the screen 21 Try another channel; it could be station trouble.
J Press ANT to change the input mode (see page 48).
Dotted lines J Adjust the antenna.
or stripes ,21 Move the TV away from noise sources such as cars, neon signs, or hair-
dryers.
Double images or ghosts _ using a highly directional outdoor antenna or a cable may solve the
problem.
"Black l_0x;' On Screen _ " You haveselected a text option in the Setup Menu and no text isavaflablel
(See page 83 to reset Setup selections.) To turn off this feature, set the
Caption Vision option to Off. If you were trying to select closed captioning,
select COl instead of TEXT1-4.
Biack bands appear at the ...... Some wicle-screen progr_s are filmed in aspect ratios that are greater
top and bottom of the screen than 16:9 (this is especially common with theatrical releases). Your TV will
show these programs with black bands at the top and bottom of the screen.
For more details, check the documentation that came with your DVD (or
contact your program provider).
certain programs on DVD or J The compression used by certain digital broadcasts and DVDs may cause
other digital sources display your TV's screen to display less detail than usual, or cause artifacts (small
a loss of detail, especially blocks or dots, pixelations) to appear on your screen. This is due to your
during fast-motion or dark TV's large screen and ability to show very fine detail, and is normal for
scenes certain digitally recorded programs. Adjust the reality/clarity in the DRC
Palette menu (see page 73) to optimize the picture while viewing these
sources.
92