Sony KP-57WV600 Operating Instructions Manual page 24

To connect the cable box and cable
1 Connect the cable from your cable company to the TV's
VHF/UHF jack.
3
4
Use a coaxial cable to connect the TV's TO CONVERTER jack to
the cable box's input jack. (The TV's internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.)
Use a coaxial cable to connect the cable box's output jack to the
TV's AUX jack.
Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 43.
Coaxialcable AUX
OUT 3 TO
2 CONVERTER
7s-ohm coaxialcable _"_ Jr_
(not supplied)
1 VHF/UHF
CAW cable (unscrambled channels)
Notes on Using This Connection
Use the cable box
Set up the _ remote Control
to operate the cable box
Activate the remote control to
operate the cable box
Prevent the accidental
switching of TV channels
Switch the TV's input
between the cable box and
cable
Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Program the remote control See ";Progr_ng the Remote Control;' on
pages 51-52.
Press SATfCABLEFUNCTION.
When using the Cable box, you need the TV to stay on the channel the cable
box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see "Using the Channel
Menu" on page 78.
Press ANT to Switch back and forth between the TV's VHF/UHF
(unscrambled channels) and AUX (scrambled) inputs.
23