Connecting A Dvd Player With Component Video Connectors - Sony KZ-32TS1U Operating Instructions Manual

II
_ Installing and Connecting the TV
4, II
Connecting a DVD Player with Component Video
Connectors
This is the preferred hookup to use if:
• Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the DVD player's
Y, B-Y and R-Y jacks to the Y, P_ and P_ jacks on the TV. Use the
COMPONENT VIDEO IN 1 connections.
Tip
The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled Y, C_ and C_, or
Y, P_ and PR. If so, connect the cables to like colors.
2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks. Be sure to use the same row of inputs that
you used for the video connection (COMPONENT VIDEO IN 1 or 2).
÷
Rear of TV
V!'FtlJ_
RK-74A (not supplied) ----_,
2
PR
P8
Y
1
(not supplied)
÷
Tips
• Totake advantage of the Wide Screen Modes, set theTV's aspect raliolo 16:9onyour
DVD player. For details, refer Io the operaling inslructions supplied with your DVD player.
• Some DVD player,s are equipped with the three component video connectons; Y-Green, P_
(CB, Cbor B-Y) -Blue and P_ (C_, C_or R-Y) -Red.
12 (us)
I I 01USO4CON_UC(8+t 9} p65 12
KZ-32/42TS1U 4-087-364-13 (1)
÷
2002.622, 3:13 PM
II