Sony KP-61XBR48 Operating Instructions Manual page 30

<!:
Selecting an output signal (INPUT/
OUTPUT)
You can :select an output signal from the SELECT OUT
jacks at the rear of file projection TV.
TV/VIDEO
_ c_c3
®®®
@@(9
®®®
o@0
I' ,_._i+(.+)
MENU
Joystick
1
2
Press MENU.
Press the joystick up or down to select
INPUT/OUTPUT and click the joystick.
t
I_ .... _ OUT
Use (_I R ETUPN_ E_'
3
SeLect MONITOR OUT, EDIT OUT or TV OUT.
Select To
MONITOR OUT
EDIT OUT
TV OUT
Output the signal of the picture
displayed on the projection TV screen.
Use this option to edit tapes while
monitoring.
Output tile signal input to the
projection TV regardless of the
displayed picture on the screen.
Use this option to edit tapes while
watching an input image different
from that being recorded.
Output the TV signal.
Use this option when you connect an
AV receiver to the VIDEO 1 IN jacks.
To select MONITOR OUT:
(1) Make sure the cursor is beside MONITOR OUT
and click the joystick.
(2)
Press TV/VIDEO :o select the input to the
projection TV and click the joystick.
TVNIDEO
c 77;0;--2__]
El VIDEO LABEL []
Use (.") RETURN _2. Exrl (_
To select EDIT OUI"
(1) Press the joystick up or down to select EDIT
OUT and click the joystick.
(2) Press the joystick up or down to select the input
to be edited and dick the joystick.
t
k_-v- I ;
Vll_EO 1 OUT
IIl_l L__-I
1_ [] VIDEO LABEL
[]
U;e (_1 RETURNS. E_it
To select
TV OUT:
(1) Press the joystick up or down to select TV OUT
and click the joystick.
"Set up using only VIDEO1 input?" appears.
t
/
'\
&
Isetuu
onty VIDE01
input?
LI.N_ Lse I!)RETURN®E_
(2)
If you connect only an AV rece:.ver to your
projection TV, press the joystick up or down to
se]LectYES. TEen (:lick the joystick. You can
always select tl-e signal from tke receiver by
pressing TViVIDEO once.
If you connect your audio/video equipment to
the projection TV select NO. You can select any
of the VIDEO 1 tc VIDEO 5 inputs with the TVi
VIDEO button.
Notes
* When you set }NPUT/OU'FPUT
to TV OUT, you cannot
swap
the main/right and winctow/left pictures.
• The SELECT OUT signal is only available when the projection
TV is on
30-EN I Operations