Epson Stylus CX6600 Quick Manual page 25

4. Make sure
Scan Index
doesn't appear, press the
the LCD screen until you see
5. Place the index form face-down on the scanner, so that the top of the form is
aligned against the left edge of the glass (see page 29).
6. Press the x
Color
automatically printed.
Selecting Photos from the Control Panel
1. Once you have printed the index form, identify a photo or range of
consecutive photos you want to print.
2. Make sure you're in Card Print mode (if necessary, press the
button).
3. Press the green button next to the LCD
screen to select
, or
images All images
4. If you want to print one image or a range
of images, follow the instructions on the
screen and use the number keypad to
select the images you want to print,
then press
OK
5. Enter the number of copies of each photo you want to print (up to 99),
then press
OK
Note:
The number of copies is how many times each photo prints, not the number of
pages. For example, if you're using a layout that fits 8 photos and you select 3
copies, you will get one sheet with 3 photos printed on it.
6. Change any print settings, as needed (see page 27). You can select the paper
type, paper size (unless you're using plain paper), and layout.
Note:
The number of pages cannot be selected; it is determined automatically by your
chosen layout and number of copies.
7. Load the type of paper you've chosen to print on (see "Loading Paper" on
page 9).
8. Press the x
Color
appears on the control panel, then press
Card Print
Scan Index
button. The form is scanned and your photos are
,
One image Range of
, then press
.
.
button. Your photos are printed.
button, press the green button next to
, then press
Select images
.
OK
Selecting Photos to Print
. (If it
OK
.)
OK
Card Print
25