Solving Problems; Problems And Solutions - Epson Stylus CX6600 Quick Manual

Solving Problems

If you have a problem with your Stylus CX6600, check the messages on the LCD
screen, run a nozzle check (see page 31), or see "Problems and Solutions" below.
For problems with scanning or printing from your computer, double-click the
CX6600 Reference Guide icon on your computer desktop.
If none of these solutions solves your problem, see "Where To Get Help" on
page 39.

Problems and Solutions

Check the solutions below if you're having trouble using your CX6600 in
stand-alone mode.
Copying Problems
■
Make sure your paper is positioned on the right side of the sheet feeder,
behind the feeder guard, then slide the left edge guide against the paper
(but not too tightly). Don't load paper above the arrow on the left edge guide.
■
Make sure your paper is loaded short edge first.
■
Make sure your original is positioned in the top-left corner of the glass, with
the short edge at the left (see page 29). Place it approximately 1/8 inch from
the edge of the glass to avoid cropping.
■
Make sure you select the copy layout you want. See page 17 for instructions.
■
If you select
Auto Fit Page
edges, the original size may not be recognized correctly. Select
Reduce/Enlarge setting and use the Optional Zoom setting to adjust the size
of your copy.
to copy a document with white or very light
as the
Actual
37