Sony Handycam DCR-SX83 Operating Manual page 262

Step 1" Charging the battery pack
3
CHG (charge) lamp
DCIN jack
Battery pack J Power cord
(Mains lead)
DC plug
AC Adaptor To the wall outlet
(wall socket)
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.
(_ Notes
• 5_u cannot attach any "InIbLITHIUM" battery pack other than the V series to your camcorder.
Turn offyour camcorder by closing the LCDscreen.
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Align the • mark on the DC plug with that on the DC IN jack.
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
When the battery is charged, disconnect the ACAdaptor from the DCIN
jack of your camcorder.