Cable Box Connections; Cable Box And Cable - Sony WEGA KV-36FV1 Operating Instructions Manual

Connecting and Installing the TV (continued)
Cable Box Connections
Some pay cable TV systems use scrambled or
encoded signals that require a cable box to
view all channels.
Cable box
1 Connect the coaxial connector from your
cable to the IN on your cable box.
2 Using a coaxial cable, connect OUT on
your cable box to VHF/UHF on your TV.
I Ifyouwillbecontrollingallchannelselection
through your cable box, you should consider
using the CHANNEL FIX feature. (see page 24)
Cable
-3
IN
I
(Rear of TV)
VHF/UHF
[--_--] OUT
Cable box
Cable box and cable
For this set up, you can switch between
scrambled channels (through your cable box),
and normal (CATV) channels by pressing
ANT on your remote control.
Notes
• Your Sony remote control can be
programmed to operate your cable box.
(see page 26)
• When using PIP, you cannot view the
AUX input in the window picture.
Tip"_ o
Pressing ANT switches between theseinputs.
4
I fyou are connecting a cable box through theAUXinputand
would like to switch between the AUX and normal (CATV) input
you should consider using the CHANNEL FIX feature. (see page 24)
Cable box (Rear of TV)
AUX
scrambled
channels TO CONVERTER
75-ohm coaxial ,_ (signal)
g
cable (not supplied) VHF/UHF
CATV cable
(unscrambled channels)