Troubleshooting - Sony WEGA KV-36FV1 Operating Instructions Manual

Troubleshooting
Consult the table below; it suggests solutions to specific problems.
Problem ;
You want to restore the TV's
factory settings
:What it could be :: : :
What you can do ..... ....
• First, turn the TV on. Then while pressing the RESET
button on the remote control, press the POWER button
on the TV. The TV will turn itself off and then back on.
When the TV turns on again, all settings will be reset,
and the Easy Setup Guide will appear.
A red light keeps flashing on the • Your TV may need service. • Call your local Sony service center.
TV for more than a few seconds
TV makes a noise when turned • This is a normal function of your TV.
on
Screen is not lit and there is no • Power cord may not be plugged in. • Press TV/VIDEO until you receive a channel.
sound • Batteries may not be inserted correctly.
• TV/VIDEO setting may be incorrect.
Poor or no picture (screen lit), • VIDEO menu settings may not be adjusted correctly. • Readjust your VIDEO menu settings. (see page 21)
good sound • Antenna/cable connections may be faulty, • Check your VIDEO LABEL settings. (see page 25)
• VIDEO LABEL inputs may be set to WEB. (This label
darkens the screen for ideal WebTV viewing)
Good picture, no sound • Sound may be set to MUTING. • Press MUTING.
• Your TV may be set to SAP. • Check the MTS setting in the AUDIO menu. (see page 22)
• Speaker may not be set correctly. • Check your SPEAKER settings. (see page 22)
No color • Color settings may not be adjusted correctly. • Adjust the COLOR settings in the VIDEO menu.
(see page 21)
29