Sylvania LD200SL9 Owner's Manual page 36

Thisfeatureallowsyouto assign a specific pointona discto becalledback
later.
To set a marker
During playback, press [MODE] repeatedly until
.... /" "appears.
e.g.) DVD
2 Use [Cursor A/V] repeatedly until marker search menu
appears.
OF
3 Use [Cursor _1 liD"] to select an available marker within
60 seconds.
When the playback reaches the point at which you
want to set a marker, press [ENTER].
• Marker is now set.
To return to the marker later
To select a desired marker, repeat steps 1 to 3 in
"To set a marker".
e.g.) DVD
Press [ENTER] at the desired marker to start playback
from the specific point which you set.
Note:
• Marker Search menu will disappear in about 60 seconds
when there is no input.
• Youcan mark up to 10points.
• To clear a marker, select the marker to be cleared, and then
press[CLEAR].
• Ejecting the disc or turning off the power will erase all mark-
ers.
• Selecting "at step 3 in the section "Toset a marker"
will also eraseall markers.
5 Press [RETURN] to exit.
EN