RECORDING
Make
sure ...
• TV/VCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place• (If necessary, rewind or fast forward the tape to the
point at which you want to begin recording.)
NOTE:
This unit will ONLY record and view the same channel•
You can ONLY watch the same TV program that is being
recorded.
3
•
OHIO]
J
Press the number buttons on the
remote control or the
CHANNEL
• or • button.
Remember:
If the TV/VCR is connected to a cable box
or satellite box, the TV/VCR must be on CH3 or CH4,
then the channel to be recorded must be selected on the
cable box or satellite box.
Press the SPEED button to select
the desired tape speed (SP/SLP).
i9
Press the PAUSE/STILL
button
( .....
to temporarily stop recording.
Press the PAUSE/STILL
or
RECORD button to resume
recording•
_"
NOTES:
• After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape damage.
• If "CLOSED CAPTION
(ON)" is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear•
Press the RECORD button.
Press the STOP button when recording is completed.
- 23 -
EN
9A07