Table of Contents
Advertisement
❏ Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the printer
has been in use, the fuser and the surrounding areas may be
very hot. If you must touch one of these areas, wait 30 minutes
to allow the heat to subside before doing so.
2
1. Do not insert your hand deep into the fuser unit.
2. CAUTION HIGH TEMPERATURE
❏ Do not insert your hand deep into the fuser unit as some
components are sharp and may cause injury.
❏ Avoid touching the components inside the printer unless
instructed to do so in this guide.
❏ Never force the printer's components into place. Although the
printer is designed to be sturdy, rough handling can damage
it.
❏ When handling a toner cartridge, always place it on a clean,
smooth surface.
1
Safety Instructions
5
Advertisement
Table of Contents
