Epson C2600/2600 Owner's Manual page 217

5. Click Auto Setup to select the PostScript Printer Description
(PPD) file. When a PPD file is selected, the selected printer
name will be displayed under the printer icon. If the printer
name is incorrect, click Change, then select the correct PPD
file.
6. After the USB printer and PPD file have been selected, click
Create. A warning message suggesting to save changes to
desktop printer appears. Select Save.
7. Select Save to continue. The USB printer icon will be displayed
on the desktop.
Selecting a printer in a network environment
If the printer is connected through the Ethernet interface or an
optional network card.
For Mac OS X users
Follow the steps below to select the printer.
Note:
❏ You cannot use FireWire for printer connection in the PostScript 3
mode. Although EPSON FireWire appears in the interface pop-up
list, it cannot be used with the PostScript 3 printer driver.
❏ You need to make the settings for your installed options manually
when the printer is connected using USB, IP printing, or
Rendezvous. When the printer is connected using AppleTalk, the
printer software automatically makes the settings.
❏ Make sure to specify ASCII as the data format in the application.
Binary data cannot be printed properly when using IP Printing or
Rendezvous connection.
1. Open the Applications folder, open the Utilities folder, then
double-click Printer Setup Utility (for Mac OS X 10.3) or Print
Center (for Mac OS X 10.2).
The Printer List window appears.
Using the PostScript Printer Driver
6
6
6
6
6
6
6
6
6
6
6
6
217